Micro Reset Switches Series 44: Solder / PCB Horizontal Types
Sunshine Series 44 Micro Reset Switch is a snap acting momentary switch suitable for low level and power level switching. High switching reliability is built into the design of the switch. By using a double-make double-break design, the current rating is increased and the switch can also be used for DC switching. Low contact resistance and protection against surge currents, as in Inductive and Capacitance loading, is ensured by the design.
ELECTRICAL SPECIFICATIONS
|
CONTACT CONFIGURATION |
(Double throw two circuit) |
|
CONTACT RATING |
With 200 ± 50 gms operating force |
|
CONTACT RESISTANCE |
100 milliohms max initial |
|
ELECTRICAL |
25,000 operations at rated load. With lower contact-loads life will be correspondingly higher |
|
MECHANICAL LIFE |
100,000 operations |
|
INSULATION RESISTANCE |
100 Megohms min. |
|
DIELECTRIC STRENGTH |
1000 V RMS |
|
PRETRAVEL |
1.27 mm (max) |
|
OVERTRAVEL |
0.25 mm (min) |
MATERIAL FINISHES
|
BODY |
Glass Filled PBT (UL Approved) |
|
PLUNGER |
Acetal |
NOTE
Standard / Low level combination could be used in low level or power circuits. However, if low level rating is exceeded, gold plating is likely to be removed and the switch is no longer recommended for low level currents.
DIMENSIONAL INFORMATIONS
ORDERING INFORMATION
The switch can be ordered as given below
